Description
Meet the new CO3DPRINT Premium needlepoint frame kit: wider, thicker stretcher bars, redesigned corner connectors, and starter tacks included. Each kit contains all four bars needed to assemble one frame in your selected size and color.
WHAT’S INCLUDED
• 4 Premium stretcher bars: two matching connector pairs that assemble into one frame.
• A starter set of tacks.
• Additional tacks when you select an extra-tack option.
Canvas, needle, thread, scissors, and other styling accessories are not included. This is a frame-and-tacks kit, not a complete needlepoint project kit.
THE NEW PREMIUM MODEL
• Wider bar profile: approximately 19 mm across the top face.
• Thicker bar body: approximately 14 mm high.
• Redesigned tongue-and-socket corner connectors.
• Pre-made tack holes along the top faces.
• Molded direction arrows near the connections.
• Center marks and size markings to help identify and position the bars.
• Reusable, 3D-printed plastic construction.
The Premium model keeps the existing length choices while updating the bar profile and corner design.
AVAILABLE LENGTHS
4, 5, 6, 7, 8, 9, and 10 inches.
Every size option is a four-piece kit for one frame. The open stitching area is smaller than the overall frame; do not treat the selected size as the clear stitching opening. Allow enough canvas around your design for mounting over the bars.
AVAILABLE COLORS
White, Pink, Green, and Purple.
HOW TO ORDER
1. Choose your kit size.
2. Select the standard kit with included starter tacks, or a kit with extra tacks.
3. Choose your color.
4. Order quantity 1 for one complete four-bar frame kit.
ASSEMBLY AND USE
Place the bars on a flat surface with matching connector ends together. Follow the molded direction arrows and seat the corners evenly. Check that the frame is square before mounting your canvas.
Position your canvas over the frame and use the pre-made holes for tack placement. Work around opposite sides gradually to distribute the tension. Test one tack before mounting the full canvas. Avoid excessive tension or forcing a tack that does not fit.
TACKS AND EXTRA-TACK OPTIONS
A starter set of tacks is included with every kit. Choose an extra-tack option if you would like additional tacks supplied with your order. The listed extra quantity is in addition to the starter set.
Replacement tack fit can vary by brand and shaft size. Use the supplied tacks first and test replacements before mounting your canvas.
COMPATIBILITY
Use the four matching Premium bars supplied together. This model uses a different connector system from our earlier mini cross-key bars. Compatibility with older CO3DPRINT bars, wooden stretcher bars, or other brands is not guaranteed.
MATERIAL AND CARE
Made from 3D-printed plastic. Fine layer lines and slight surface variations are normal. Color may vary slightly by screen and filament batch.
Wipe clean with a soft, damp cloth and dry before storing. Keep away from high heat and prolonged direct sunlight.
Designed and made by CO3DPRINT in the USA.
Tacks are sharp. Handle with care and keep loose tacks away from children and pets.
Reviews
There are no reviews yet.