Description
Give your Ford smart key—and the house keys already attached to it—a dedicated spot. This compact black holder is designed around the Ford fob body style pictured, with curved sides, an open front, and space below for your attached keyring.
The flat back uses double-sided adhesive for mounting on a suitable surface. Place it where your fob is easy to reach, whether in your vehicle or near your home or garage entry.
WHAT'S INCLUDED
– Your selected pack of 1, 2, 3 or 4 black plastic key fob holders.
– Double-sided adhesive backing for each holder.
– Key fob, metal keyring, house keys, vehicle, and styling accessories are not included.
DESIGN DETAILS
– Open top for inserting and lifting out your fob.
– Open front with rounded side walls.
– Curved lower support and an opening for keyring clearance.
– House keys can hang from your fob's existing keyring below the holder.
– Compact black design with a flat adhesive mounting back.
– Designed and 3D printed by CO3DPRINT in USA.
DOES FOB HAVE A COVER?
• No Cover on Fob (Original): for your bare fob without a protective cover.
• Fob Cover (Cover Fits): for your fob with its protective cover already installed. Measure the full covered length, width and thickness; cover sizes vary.
A protective cover is not supplied. These options describe the holder fit for your existing fob.
PACK QUANTITY AND BULK PRICING
• 1 Holder — $12.99
• 2 Holders — $23.99 total
• 3 Holders — $33.99 total
• 4 Holders — $42.99 total
Each holder includes double-sided adhesive backing. Select the number of holders in one pack; The quantity selector is the number of packs. Each pack is for the same fob style and cover choice. For different fob shapes or cover choices, add separate selections. Prices exclude shipping and applicable tax.
FORD FOB COMPATIBILITY
Intended for the Ford smart-key body style shown in the photos. Compare your fob's overall shape, thickness, and lower keyring opening before ordering. Ford uses different key styles across vehicles, years, and trims, so the Ford name or vehicle model alone does not establish fit.
Protective covers and bulky key accessories can affect clearance. If you are unsure, send CO3DPRINT a front and side photo of your fob with its dimensions before ordering. This is not a universal key holder.
APPROXIMATE HOLDER SIZE
48.2 mm wide × 50 mm high × 28.3 mm deep.
Approximately 1.90 × 1.97 × 1.11 inches.
These are the original holder's outside dimensions, not the usable fob opening. Fob Cover sizing depends on the actual covered fob measurements and may change the holder's outside dimensions. Send your fob's full length, width and thickness in mm, measured with its cover installed for Fob Cover, plus front and side photos before ordering. Small production variations may occur.
ADHESIVE INSTALLATION
1. Choose a suitable clean, dry, flat surface. Check that your fob and attached keys have room to move.
2. Prepare the surface as directed for the adhesive and the mounting surface.
3. Peel the release liner, position the holder, and press firmly.
4. Allow the adhesive to bond as directed before adding your fob and keys.
Keep clear of controls, vents, visibility, and airbag areas. Rough, curved, soft-touch, or treated surfaces may not be suitable. Do not overload the fob with a heavy key bundle. Remove your key from the vehicle when you leave.
CARE AND FINISH
Wipe gently with a soft cloth. Avoid abrasive cleaners and solvents. Each piece is made using 3D printing, so small surface and finish variations are normal.
This is an independent CO3DPRINT accessory, not a Ford-manufactured or Ford-endorsed product. Ford references identify the intended key style. No vehicle key or electronic component is supplied.
Reviews
There are no reviews yet.